Request a Quote
It just takes a minute to let us know what you're looking for.
It just takes a minute to let us know what you're looking for.
From KOA.COM
The weather is getting warmer, the days are getting longer and the excitement of hitting the road in your RV is setting in again. Unless you are a full-time RV-er, this means bringing your rig out of storage and performing RV spring maintenance to get your camper ready for the season. Before you head out on your first camping trip of spring, use this RV dewinterizing guide to get your RV clean and ready for travel again.
When it’s finally time to bring your RV out of storage, you will need to take several steps to reverse the RV winterizing process that you performed in the fall. Follow these steps for RV dewinterizing to get your RV in peak condition for the season:
During the months in storage, your RV tires will lose about two to three psi of air pressure each month. If your RV is stored outside or somewhere cold, your tires may be even more deflated when you uncover your camper in the spring. Driving your RV with underinflated tires can cause poor handling, uneven wear, a blowout and may even lead to an accident. According to the National Highway Traffic Safety Administration, tire condition was a contributing factor in 655 vehicle crashes in 2017, and tire-related crashes led to 738 motor vehicle fatalities.
Using a tire pressure gauge, check the air pressure in all of your RV tires — including the spare. Reinflate the tires to match the manufacturer’s recommendation based on the load. If you are unsure of the correct tire pressure for your RV, check your owner’s manual.
When inspecting your RV tires, check for signs of wear, such as cracks in the sidewalls and worn down treads. The start of the season is a great time to purchase new RV tires — especially if you already have some long-distance adventures planned.
Before diving into more intensive RV spring maintenance, visually inspect the outside of your RV for any damages, leaks or cracks. Inspect the weatherstripping around windows and doors and replace any sealant that is cracked or peeling. Check all body, roof and slide-out seams and apply new seals as necessary.
If you stored your RV outdoors for the winter, check for any water damage and pay particular attention to the roof — heavy snow accumulation can lead to structural damage or cause seams to crack. When working on the roof of your RV, use extra caution to prevent a fall.
If you have a towable camper, inspect the hitch components for rust and damage. Replace any damaged parts now to avoid an accident or getting stuck out on the road with a broken hitch.
Just as your RV tires will lose pressure during storage, your RV batteries will also lose a percentage of their charge due to internal leakage. If they are not periodically checked and recharged during the off-season, your RV batteries lose a small percent of their charge each month that they are in storage. By keeping your batteries charged during storage, you can extend the lifespan of your RV batteries and will be ready to go when the season starts!
Before your first RV trip of the spring, check the charge on your batteries using a voltmeter. Make sure your RV is not connected to electricity, or you will get a false reading. A fully charged 12-volt RV battery will actually read about 12.7 volts. If your battery reads just 12 volts or below, it should be charged before you take your RV on the road.
To charge your RV batteries, attach the battery charger to the RV charger while the battery charger is turned off. Turn the battery charger on and allow the battery to charge completely. Depending on the battery size, your RV batteries may need to charge for a few hours or a few days.
After the battery is charged, check the water level in the battery and add distilled water to reach the correct level. If the water level is below the plates, water should be added before charging the battery, as the plates should always remain covered.
When reinstalling your RV battery, check that it is connected securely. If you are not confident in checking and installing your battery on your own, contact an RV maintenance service to perform this RV spring maintenance task for you.
Dewinterizing your water system is one of the most crucial steps of RV spring preparation. When you are on the road, you rely on a clean source of water for cooking, drinking, washing dishes and showering. However, when you winterized your RV water system in the fall, you most likely added non-toxic RV antifreeze to the water system to prevent the pipes from freezing. This antifreeze must now be flushed out of the plumbing system so the water is clean and safe to drink.
If you added anti-freeze directly to the fresh water holding tank, the first step is to drain the tank entirely. Add potable water back into the fresh water holding tank and then follow these steps for how to flush antifreeze from your camper water system:
If your water heater was not put into bypass mode for winter storage, you will also need to drain the RV antifreeze from the water heater tank and collect it for disposal. Do this before replacing the water filters.
After flushing your water system for several minutes, your water should taste clean and fresh, but if it still has a residual antifreeze taste, you can add baking soda to help remove this unpleasant flavor. Simply sprinkle baking soda directly into each drain or dissolve it in water and pour it down the drains. Flush the system again until the water tastes clean.
Instead of using your RV water pump to flush antifreeze from your camper’s water system, you can also use a garden hose or city water supply. Begin by attaching the hose to your water hookup instead of turning on the RV water pump, and then follow the same steps described above.
The second essential step for dewinterizing your RV water system is to sanitize it. Even if you did not use non-toxic antifreeze to winterize your plumbing system, sanitizing your water system is still important for removing any bacteria or mold that could have grown during the months in storage. Follow these steps to sanitize your RV water system:
When sanitizing your RV water system, it is important to allow the bleach to sit for long enough to effectively eliminate harmful bacteria. However, leaving bleach in your water lines for too long can cause synthetic seals to deteriorate more quickly. To effectively sanitize your water system without damaging plumbing components, let the bleach solution sit for at least a few hours but no longer than 12 hours.
While you are preparing your RV water system for the start of the season, check your plumbing system for any leaks. With water in the fresh water tank, turn on the electric pump and allow it to pressurize the water system. When the system reaches full pressure, the pump will shut off. Listen for several minutes to hear if the pump turns back on. If the pump cycles back on again or does not shut off at all, there is a leak somewhere in your plumbing system.
Locate the leak by checking the pipe system and looking for leaks under sinks. Check the toilet for leakage around the edge. Leaks inside your RV may also cause water damage if not addressed quickly. Repair any leaks you identify or take your camper to an RV repair service if you are not comfortable fixing the leak on your own.
If your RV uses propane, reinstall your propane tanks on their mounts and connect the hose. Make sure the hose is fitted tightly by turning on the propane valve a little bit to open the gas line. Apply soapy water to each of the hose connectors using a sponge or small spray bottle. Watch to see if any bubbles form, indicating that there may be a propane leak. Tighten the fitting and repeat the process to make sure it is tightly connected.
If your RV has refillable propane tanks, take them to a propane station to be filled. Some states require propane tanks to be recertified periodically. If your state requires propane tank recertification, make sure your tanks have not expired and ask when your tanks will need to be recertified.
After your propane tanks are reinstalled, check that all of your LP gas-fired appliances are working properly by opening the gas line and testing each appliance. When testing the hot water heater, make sure it is full of water first.
If any of your gas-fired appliances are not working, schedule an inspection with a certified RV maintenance service. Propane leaks or ignition issues can be dangerous and are best handled by professionals.
If all of your propane appliances are operating properly, plug in your unit and test the 120-volt appliances. Make sure you are using a sufficient electricity source of 30 or 50 amps, or appliances like air conditioners and microwaves may not run properly.
To test your refrigerator in electric mode, first, turn it off and then open the doors to allow it to return to room temperature. Plug it back in once your RV is connected to an electrical hook-up.
Inspect the RV engine by checking all engine fluid levels and making sure all lights and controls are operational. Check the fluid levels of the power steering, transmission, engine oil, brake fluid, engine coolant and windshield washer fluid. If any levels are low, top them off before your first camping adventure or have your RV serviced. If you are concerned that there is a leak in any part of the engine, take your RV to a mechanic.
After checking the engine fluid levels, hop in the driver’s seat and start the engine. Check the readings on all gauges and verify that all dash lights, headlights, taillights and windshield wipers are working. If any service lights come on, have your RV inspected by a certified mechanic.
If your RV has an onboard generator, check the oil level. If oil levels are low, have your generator serviced by a professional.
Before testing your generator, check the exhaust system for any damage. Operating a generator with a damaged exhaust system can harm the generator and lead to serious consequences. After inspecting the exhaust, turn the generator on to test it. If you exercised your RV generator during storage, it should start up easily. If the generator was not operated at all during storage, run it for a few hours with a half-rated load. Refer to the owner’s manual for load ratings.
If your generator surges or will not start, have it inspected and repaired.
During RV spring maintenance, change out all of your air and water filters. Air filters can collect a lot of dust and debris during a busy camping season, so start the season fresh with clean filters. Changing filters in your air conditioner and water systems can also improve the efficiency of your systems and save energy. When changing air and water filters, make sure to purchase the correct size for your air conditioner and water system. Ensure the filters fit snugly to effectively filter out dirt and bacteria.
As part of your RV spring maintenance, open all of your windows and air vents to make sure they are in working order. Air vents ensure proper air flow through your camper to prevent excess humidity and keep you cool all summer long. Properly functioning air vents become even more essential when you turn your RV heat back on in the fall, as they protect against toxic gas build-up inside your RV. Opening all of your windows will also refresh your RV with clean spring air after you take it out of storage.
Before heading out on the road, make sure all of the safety devices in your RV are operating properly. This includes your smoke alarm, fire extinguisher, carbon monoxide detector and LP detector. Install new batteries in all battery-powered safety devices. Test your carbon monoxide detector and smoke alarm. Make sure you know the symptoms of carbon monoxide poisoning and how to prevent a carbon monoxide leak in your RV.
Look at the expiration date on your fire extinguisher and purchase a new one if yours is outdated. If your RV has a dry powder fire extinguisher, release any powder that may have settled during storage by shaking it and tapping it on the bottom. Make sure you know how to properly operate your fire extinguisher and know what each safety alarm in your RV sounds like. Planning for safety in advance can help ensure a smooth and carefree RV camping season.
Another crucial step for RV safety this camping season is to restock your RV first aid and emergency supplies as part of your RV spring preparation. Check the expiration dates on any medicines and restock any first aid supplies that are low. Get rid of any dry food that has expired and make sure your RV has plenty of bottled water in case of an emergency. Your RV emergency kit should also include tools and other supplies for emergency RV repairs, such as pliers, a hammer, screwdrivers, extra oil and coolant, hoses, batteries and leveling blocks.
After dewinterizing your RV battery, water system, propane and engine, the final step for getting your RV ready for travel is making sure your papers are in order. Check that your RV registration is up-to-date, as well as your RV insurance and emissions sticker. If you have a towable RV, you may not be required to keep it insured, but having insurance can be a smart investment to protect your camper in case of an accident.
Store your RV documentation in an accessible place in your RV. Should you ever be pulled over or have an accident, you will be happy to have all of the necessary paperwork on hand.
In addition to your essential RV dewinterizing tasks, the start of the camping season is the perfect time for some RV spring cleaning. Here are a few RV cleaning tips to get your camper clean and sparkling before you head out for your first adventure of the season:
By following these RV spring cleaning tips, your RV will be ready for travel in no time!